Common problems
- Dryer not heating
- Gas dryer ignition or burner problem
- Dryer not tumbling
- Dryer takes too long to dry
- Dryer will not start
- Squeaking, thumping or rattling sounds
Request electric or gas dryer repair in Toronto and nearby GTA communities. Describe whether the dryer starts, tumbles, heats, stops early, makes noise, has an ignition concern or takes multiple cycles to dry a load.

For Dryer Repair, describe what happens during normal use, when the symptom appears and any model, error-code or photo detail that helps show the condition.
A dryer can tumble without heating, heat without drying properly, stop before the cycle finishes or make a new mechanical noise. Describe heat, drum movement and drying time separately. For a gas dryer, identify the fuel type and treat any suspected gas odour as an emergency rather than a routine repair request.
Useful details include whether the drum turns, whether clothing becomes warm, whether cycles take longer than before and whether the machine shuts off early. A vent warning or lint-related symptom should be included rather than assumed to be an internal dryer fault.
Laundry closets, stacked units and finished basement installations can limit service access. Include a photo showing the whole dryer and the surrounding space, especially when the unit cannot be reached from both sides.
Do not attempt to inspect or adjust gas connections. If you smell natural gas, leave the area and call 911 or Enbridge Gas at 1-866-763-5427 from a safe distance.
Include whether the load gets warm, whether airflow seems weaker than normal and whether a vent warning appears. Those details help separate heat, airflow and cycle-control symptoms.
Yes. Mention that the unit is stacked and include the surrounding closet or alcove in a photo so access can be reviewed.
Leave the area immediately and contact 911 or Enbridge Gas at 1-866-763-5427 from a safe distance. Do not use the website to troubleshoot an active gas-leak concern.
If the appliance is gas-powered, choose Gas Appliance Repair and include the fuel type, ignition behaviour and any other safe observations that help with request review.
Published Repair Guides support troubleshooting and planning. They are informational and do not replace an appliance diagnosis.
Include whether the dryer is electric or gas, whether the drum tumbles, whether any heat is produced, how long cycles take and whether the vent has recently been cleaned.
Yes. Add photos and explain any closet, condo or stacked-unit access limitations.
Long drying times can have several causes. Describe the load size, heat level, airflow symptoms and any recent changes so the request can be reviewed.
Stop using the appliance and disconnect power if it is safe to do so. A burning smell or repeated breaker trip should be assessed before further use.
Long drying times have several possible causes including a blocked exhaust vent, a packed lint filter, a failing heating component or a sensor problem. Include the load size, heat level observed and whether the vent was recently cleaned when submitting the request.
Yes. Gas dryer repair requests can be submitted. Identify the appliance as gas-powered and describe the symptoms clearly so the request can be matched to a contractor with the appropriate qualifications for gas appliance work.
Describe the specific dryer repair need, add the service address and include model, symptom, access or installation details that are relevant to this job.
Start Your Repair Request